Current clamp TP-CC600

Current clamp TP-CC600

$139.95

SKU: TP-CC600 Category:

Description

The Current clamp TP-CC600 is a current clamp that will allow your oscilloscope to measure electrical currents up to 600 A AC/DC, with a frequency response up to 400 Hz. When measuring with this current clamp, there is no need to break a closed circuit or to affect the isolation.

The wide jaws allow performing measurements on thick conductors.

For measuring DC current, a simple to operate zero adjust button is available.

To connect the Current clamp TP-CC600 to your oscilloscope, a BNC to banana measure lead is required, which must be ordered separately. For oscilloscopes with differential inputs, the Measure lead TP-C812A is recommended. For oscilloscopes with single-ended inputs the Measure lead TP-BNCI-100 is recommended.

Specifications

The table below shows detailed specifications of the Current clamp TP-CC600.

Electrical
Bandwidth DC to 400 Hz (-3dB)
Effective measurement range
200 A range output 1 mV/A, 1 V = 1000 A
600 A range output 0.1 mV/A, 1 V = 10000 A
Accuracy
DC 200 A range ±(3% ± 0.6 A)
DC 600 A range ±(3.5% ± 3 A)
AC 200 A range ±(3.5% ± 0.4 A)
AC 600 A range ±(4% ± 4 A)
Output connection 2 shrouded 4 mm banana sockets

Dimensions
Captured conductor size 30 mm maximum
Weight 240 g
Height 30 mm (1.2 inch)
Length 209 mm (8.2 inch)
Width 43 mm (1.7 inch)

Power Requirements
Power indicator Red LED
Battery type Standard 9 V IEC 6F22 cell
Low battery indication Red LED

Ambient
Operating Temperature 0 to 50 °C
Relative Humidity 25 to 70%
Storage Temperature -20 to 60 °C
Relative Humidity 25 to 80%

Certifications and Compliances
CE mark compliance Yes
RoHS Yes

Package contents

The Current clamp TP-CC600 is delivered with:

Amount Item
1 Current clamp TP-CC600

Downloads

Description Version Remarks Size
Current clamp TP-CC600 user manual 1.3 English 293.49 kB  download

Related Products